Step 2 inserting a cassette, To eject a cassette, Notes – Sony DCR-TRV510 User Manual
Page 12: To prevent accidental erasure
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2 inserting a cassette
We recommend using Hi8 video cassettes HJIO.
If you use standard 8 El tape, be sure to play back the tape on this camcorder.
Your camcorder records in the DigitalS B system.
(1) Slide EJECT in the direction of the arrow while pressing the small blue button.
The cassette compartment automatically lifts up and opens.
(
2
) Insert a cassette with its window lacing out and the tab on the cassette up.
(3)
Close the cassette compartment by pressing the "PUSH" mark on the cassette
compartment. The cassette compartment automatically goes down.
To eject a cassette
Slide EJECT m the direction of the arrow while pressing the small blue button.
Notes
• The recording time when you use your DigitalS system camcorder on Hi8/standard
8 tape is half the recording time when using the conventional Hi8/standard 8 system
camcorder.
•If you use standard 8 tape, be sure to play back the tape on this camcorder. Mosaic
pattern noise may appear when you play back standard 8 tape on other VCRs.
• Do not press the cassette compartment down. Doing so may cause malfunction.
To prevent accidental erasure
Slide the write-protect tab on the cassette to expose the red mark.
12