Sony DCR-TRV510 - Manual (Page 88)

Troubleshooting
Symptom Cause and/or Corrective Actions
A vertical band appears when you
'shoot a subject sud\ as lights or a
candle flame against a dark
background.
• The contrast between the subject and background is too
high. Your camcorder is not a malfunction.
A vertical band appears when you
shoot a very bright subject. • Your camcorder is not a malfunction.
Some tiny white spots appear in the
viewfinder or on the LCD screen. • Slow shutter, low lux or NightShot +Slow shutter mode is
activated. This is not a malfunction.
An unknown picture is displayed in
the viewfinder or on the LCD screen. • If 10 minutes elapse after you set the POWER switch to
CAMERA or DEMO MODE is set to ON in the MENU
settings without a cassette inserted, your camcorder
automatically starts the demonstration.
^ Insert a cassette and the demonstration stops.
You can also cancel DEMO MODE. (p. 80)
The picture is recorded in incorrect
or unnatural colors. • NIGHTSHOT is set to ON.
■ > Set it to OFF. (p. 19)
Picture appears too brigi\L and the
subject does not appear in the
viewfinder or on the IXH) screen. • NIGHTSHOT is set to ON in a bright place.
Set it to OFF, or use the NightShot function in a dark
place, (p. 19)
r,- 'irr-: VIfTi'}rcfï'< ■■■■■K lili llilM
Symptom Cause and/or Corrective Actions
The tape does not move when a
video control button is pressed. • The POWER switch is set to CAMERA or OFF.
■ > Set it to VTR. (p. 22)
• The tape has run out.
Rewind the tape. (p. 22)
The playback picture is not clear or
does not appear. • The television's video channel is not adjusted correctly.
■ > Adjust it. (p. 25)
There are four horizontal lines on the
picture or the playback picture is not
clear or does not appear. • The video head may be dirty.
Clean the heads using the Sony V8-25CLD cleaning
cassette (not supplied), (p. 95)
No sound or only a low sound is
heard when playing back a tape. • The stereo tape is played back with HiFi SOUND set to 2
in the MENU settings.
Set it to STEREO, (p. 76)
• The volume is turned to minimum.
■ > Open the LCD panel and press VOLUME +. (p. 22)
• AUDIO MIX is set to ST2 side in the MENU settings.
Adjust AUDIO MIX. (p. 76)
The date search does not work
correctly. • The tape has a blank portion in the recorded portion
(P-46)
The picture which is recorded in the
Digitals H system is not played back. • PB MODE is set to HilB/BJn the MENU settings.
Set it to AUTO. (p. 76)
The tape which is recorded in the
HiS/standard 8 system is not played
back correctly. • Set PB MODE to HÍ0/0 in the MENU settings, (p. 76)
88