Sony DCR-TRV510 - Manual (Page 78)

Changing the MENU settings
Icon/item Mode Meaning
POWER
switch
@ HiFi SOUND •STEREO To play back a stereo tape or dual sound track VTR
tape with main and sub sound
To play back dual sound track tape with main
sound
To play back a dual sound track tape with sub
sound
AUDIO MIX
@ LCD B. L
To adjust the balance between the stereo 1 and
stereo 2
STl ST2
BRIGHT To brighten the LCD screen
VTR
PB MODE • AUTO To automatically select the system (Hi8/
standard 8 or DigitalS) that was used to record
on the tape, and play back the tape
HiQ/Ol To play back a tape that was recorded in the
Hi8/standard 8 system when your camcorder
does not automatically distinguish the
recording system
• BRT NORMAL To set the brightness on the LCD screen normal VTR
CAMERA
LCD COLOR To adjust the color on the LCD screen, turn and VTR
press the SEL/PUSH EXEC dial CAMERA
To lighten To darken
VF B. L • BRT NORMAL To set the brightness in the viewfinder normal
BRIGHT To bright the viewfinder
VTR
CAMERA
Notes on AUDIO MIX
•You can adjust the balance only for tapes recorded in the DigitalS system.
• When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
Note on PB MODE
The mode will return to the factory setting when:
•you remove the battery pack or power source.
•you turn the POWER switch.
Notes on LCD B. L. and VF B. L.
• When you select "BRIGHT", battery life is reduced by about 10 percent during
recording.
• When you use power sources other than the battery pack, "BRIGHT" is automatically
selected.
78