Notes, To extend the recording time in the 5sec mode, Format indicator – Sony DCR-TRV510 User Manual
Page 18: Remaining battery time indicator, Recording a picture
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording a picture
'■ /•ir-l/C-iTir- :;Vri!V)E
Recording starts when you press-START/STOP, and stops when you press it again
(factory setting).
ANTI GROUND SHOOTING : The camcorder records only while you press START/
STOP. Use this mode to avoid recording unnecessary
scenes.
5SEC: When you press use this mode to START/STOP, your camcorder records for 5
seconds and then stops automatically.
Notes
• You cannot use the fader function in the 5SEC or
mode.
• Hie time code does not appear in the 5SEC mode.
To extend the recording time in the 5SEC mode
Five dots (#####) appear, and then disappear at a rate of one per second. To extend
the recording time, press START/STOP again before all the dote disappear. Recording
continues for about 5 seconds firom the moment you press START/STOP.
i nr.tfx-ir.iz-
jy?y^nTiTj)V■-
The indicators are not recorded on tape.
- Format indicator
• STANDBY/REC indicator
1
in:rw:om— Time code/Tape counter
Remaining tape indicator
This appears after you insert a cassette for a while.
Remaining battery time indicator
18
Time code (for tapes recorded in the Digitals E) system only)
The time code indicates the recording or playback time, "0:00:00"
(hours:minutes:seconds) in CAMERA mode and "0:00:00:00"
(hours:minutes:seconds:frames) in VTR mode. You cannot rewrite only the time code.
Your camcorder uses the drop frame mode.
When you play back tapes recorded in the Hi8/standard 8 system, the tape counter
appears.