Sony DCR-TRV510 - Manual (Page 79)

Changing the MENU settings
Icon/item Mode Meaning
POWER
switch
E] CONTINUOUS • OFF Not to store continuously CAMERA*
ON To record 3 or 4 pictures continuously
MULTI SCRN To record 9 pictures continuously
QUAUTY • STANDARD To record still pictures in the standard image
quality mode VTR
CAMERA*
FINE To store still pictures in the fine image quality
mode
FLD./FRAME • FIELD To record moving subjects CAMERA*
FRAME To record stopping subjects in high quality
PROTECT • OFF Not to protect still pictures VTR
ON To protect selected still pictures against
accidental erasure, (p. 70) CAMERA*
SLIDE SHOW To play back images in a continuous loop,
(p. 69) CAMERA*
DELETE ALL To delete all the images (p. 72) VTR
CAMERA*
FORMAT To format the built-in flash memory VTR
CAMERA*
PHOTO SAVE To duplicate still pictures (p. 63) VTR
* These items are displayed only when the STANDBY switch is set to MEMORY.
Notes on FORMAT
Format (initialize) the built-in flash memory when the warning indicator ^ flashes
fast.
To format (initialize) the built-in flash memory, carry out the following operation.
(1) Set the POWER switch to CAMERA or VTR. When you set the POWER switch
to CAMERA, turn STANDBY to MEMORY.
(2) Press MENU to display the MENU settings.
(3) Turn the SEL/PUSH EXEC dial to select , then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select FORMAT, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select OK, then press the dial.
To cancel formatting, select RETURN, then press the dial.
•Formatting erases all information in the built-in flash memory, including the protected
image data. Check the contents of the flash memory before formatting.
• Be sure that the battery pack is fully charged when formatting the built-in flash
memory.
Formatting takes about three seconds.
•Do not turn the POWER switch or press any button while the display shows
"FORMATTING".
79