V hint, Note, Notes – Sony DCR-TRV510 User Manual
Page 126
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the F
i
r
s
f
-
/sfii
1
Check the connections and confirm that an image is stored in the
video camera's internal flash memory.
2
In the File menu, point to Connections, and click Video Camera.
The Video Camera folder icon appears in the folder list, and images in
the folder appear in the View Area.
Video Camera folder icon
V Hint
If a message box appears indicating a communications problem, refer to steps 6 and 7 of
Connections and Settings, and perform the following steps:
• Decrease the baud rate.
• Confirm that the port settings are correct.
Note
If an image has been read and any of the following actior\s taken, repeat the procedure
from step 1.
- The video camera has been turned off and back on.
- The cable has been disconnected.
- A new image ha^s been taken, or data has been deleted with the video camera.
Notes
• After working with an image after viewing the List View, such as Single-Image
viewing, some time will be .required to re-read the images.
• As the video camera and the PC are busy communicating until all image are read, do
not disconnect the cable during this period.
Storing
I’lease see page 25.