Flash memory operations, Using the flash memory function - introduction, On file format (jpeg) – Sony DCR-TRV510 User Manual
Page 54: Typical image data file name, During recording in the built-in flash memory
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
— Flash Memory Operations —
Using the flash memory function - introduction
Your camcorder has a built-in flash memory with a capacity of 2MB.
The built-in flash memory can record still images, exchange still image data with tapes
and play back and delete the still image data. If you use the supplied accessories, you
can input still image data to your PC. This chapter explains the functions that are
available using the built-in flash memory.
On file format (JPEG)
This unit compresses image data in JPEG format (extension .jpg) with thumbnail data
for the index screen. The index screen data is visible only on this unit.
Typical image data file name
ex. DSC00001.jpg
During recording in the built-in flash memory
Do not turn the power off nor remove the battery pack.
You can record only still images in the built-in flash memory. You cannot record
sounds.
When using a video light (not supplied) or similar equipment mounted on the
Intelligent accessory shoe
Recording an image in the built-in flash memory may result in a temporary power
shortage in the accessory shoe, causing the video light to go out. This is not a
malfunction.
If the MEMORY FULL indicator ^ appears in the viewfinder or on the LCD screen
You cannot use Üte built-in flash memory. See "Warning indicators and messages"
(p. 92) for more information.
54