Sony DTC-57ES - Manual (Page 24)

Fade-in/Fade-out Recording CD Synchronized Recording
Fade-in recording
1 Press the «REC button at the starting point of
recording.
The deck enters the record-pause mode.
2 Press the FADER button at the point where you want
to start fading in.
The indicator flashes, and the sound fades in.
Fade-out recording
Press the FADER button at the point where you want to
start fading out.
The (s^ indicator flashes, and the sound being recorded
fades out.
A countdown starts, and the deck enters the record-pause
mode after the 0.0s indicator appears.
To enter the record-pause mode immediately during a
fade-out recording
Press the llPAUSE button.
To designate a desired duration of fede-in/fade-out
You can designate a desired duration of fade-in/fade-
out, from 0.2 seconds to 15 seconds. Fade-in/fade-out
is performed in 5 seconds unless you designate a
different duration.
If you turn off the unit after designating the desired
duration of fade-in/fade-out, the duration remains
memorized.
*1 Choose either or (¡¿”1 by pressing the
FADER button in the stop mode.
2 Designate a desired duration by pressing
«or^^.
Each time pressing
« or a duration in the
display changes as follows;
from 0.2 sec. to 3.0 sec.: in 0.2 sec. intervals
from 3.0 sec. to 5.0 sec.: in 0.4 sec. intervals
from 5.0 sec. to 15 sec.: in 1 sec. intervals.
If a Sony compact disc player with a remote commander is
available, you can start playback of the CD player and the
recording of the DAT deck simultaneously, with the remote
commander of the DAT deck.
Position the remote commander so that the signal reaches
the remote sensor of both the DAT deck and the CD player.
To start recording__________________________________
This function can be performed only with the remote
commander.
Insert a cassette.
2 Insert the disc in the CD player.
3 Press the CD SYNCHRO STANDBY button on the
remote commander of the DAT deck.
The deck enters the record-pause mode.
4 Press the CD SYNCHRO START button on the remote
commander of the DAT deck.
Recording on the DAT deck starts, and about 1 second
later, playback of the CD player starts.
To stop recording
Press the CD SYNCHRO STOP button on the remote
commander of the DAT deck.
Note
To momentarily stop recording of the DAT deck and
playback of the CD player simultaneously, press the
llPAUSE buttons on both the DAT deck and the CD player.
To control the CD player with the remote commander of
the DAT deck
The following operations are possible:
Playback... Press the ii button twice.
Pause... Press the ll button once.
AMS... Press the or
button.
When a desired selection is
located using the above
operation, you can start CD
synchronized recording.
CD operating buttons •
OD'aa'ata
cbio o'cjio
aaa;aa
caacDia
oao
ooo
□ a
o
a
oo
ODQD OO
j] nn gg
ooo
24