Sony DTC-57ES - Manual (Page 36)

Various Playback Operations
Automatic Music Sensor Operation
When you press the or button during playback,
playback will start from the beginning of the desired
selection.
When it is pressed in the pause mode, the deck enters the
pause mode at the beginning of the designated selection.
Press the liPAUSE or ► button to resume playback.
For this operation, the start ID codes must be written on the
tape.
For how to write the start ID, see page 27.
To locate the selection ahead
Press the button.
------------------------------------1---------------------------------
Each pressing advances the tape to the next
selection in sequence.
PGM NO. AMS
3
To designate five selections ahead, press the button
five times.
------------------------------- ♦ --------------------------------
When the designated selection is located,
playback resumes.
8
The display shows “0” and then goes off.
When designating the selection being played back. *-0*
appears.
You can designate a selection by pressing the numeric
buttons, instead of pressing the or button
several times. In this case, press the M^or ^ button
after pressing the numeric buttons.
Music Scan
°-^ll I
—;
\%o
_ ®
. o
s nrn
2
1
For this operation, the start ID codes must be written
on the tape. For how to write the start ID codes, see
page 27.
1
During the stop mode, press the MUSIC SCAN button.
The MUSIC SCAN indicator flashes and the designated
scan time is indicated at the MARGIN display.
2
Press the ► (play) button.
The tape is rewound to the beginning, the first part of each
selection (start ID position) is played back for the time you
designated sequentially.
The ► and ISTART ID I indicators light during playback.
To locate the previous selection
..WUtCKAN*
Press the button.
Each pressing moves the tape to the previous
selection in sequence.
PGM NO.
-
3
To designate three selection back (excluding the
selection being played), press the button four times.
When the designated selection is located,
playback resumes.
PGM NO.
The display shows “0" and then goes off.
36
1.30.
POWNO
5
When you press the »Mbutton instead of the ► (play)
button
The nearest start ID after the current position is detected,
and, after playing back the first part of that selection for the
time you designated, the next start ID in the forward
direction is located.
This operation continues until the end of the tape.
When you press the button instead of the ► (play)
button
The nearest start ID before the current position is detected,
and, after playing back the first part of that selection for the
time you designated, the next start ID in the reverse
direction is located.
This operation continues until the top of the tape.
To designate the desired scan time
While the scan time is indicated at the MARGIN display in
step 1, press the or ►► button. You can designate the
scan time up to 15 seconds in steps of a second. The scan
time is 8 seconds if the scan time is not desingated. (The
designated time remains memorized even if you turn off the
unit.)