Sony DTC-57ES - Manual (Page 37)

To listen to the beginning of a selection for more than
the designated time
Press the ► (play) button while the selection you want to
listen to is played back.
While pressing the ► button, the countdown at the MARGIN
display stops, and the playback of that selection continues.
To listen to an entire selection
Press the MUSIC SCAN button while the selection you want
to listen to is played back.
The music scan function is released, and the playback of
that selection continues.
When you press the MUSIC SCAN button during playback,
the tape is rewound to the beginning, and then the first part
of each selection (start ID position) is played back for the
time you designated sequentially.
Designating the Desired Seiection
For this operation, the selections must be numbered
by the program numbers. The program numbers
are written at the same position as the start ID
codes. For how to write the program number, see
page 29.
1 During the desired program number with the numeric
button(s)*.
PGM NO.
5 ?
Current program
number
Designated program
number
2
Press ► (play).
The designated selection is searched for at high speed
and playback starts from the beginning of that selection.
poMNa AMS
Displayed number
advanced to the
designated number one
by one.
rUMIfU.
L
Goes off.
* When you press the numeric button(s) during play-pause
mode, the deck enters the pause mode at the beginning
of the designated selection. Press the ilPAUSE or
► button to resume playback.
If an incorrect number is designated
Before pressing the ► button, press the CLEAR button.
The displayed program number will be cleared.
Then designate the correct program number.
Once the ► button is pressed, it is impossible to cancel the
designated selection.
Skip Play
For this operation, the skip ID code(s) must be written on
the tape.
Press the SKIP PLAY button.
The SKIP PLAY indicator lights.
During playback, the tape skips to the next start ID
position automatically when a skip ID is detected, and
the playback resumes.
SKIP PLAY
PGM NO.
B
To stop skip play
Press the SKIP PLAY button to turn off the SKIP PLAY
indicator.
Auto Play; Restarting Playback after Rewinding
While pressing >4^, press >■.
The tape is rewound to the beginning, and playback
starts automatically.
If the above operation is done immediately after the
cassette is inserted, the auto play operation does not
function. Press IP- a few seconds after is pressed.
37