Sony DTC-57ES - Manual (Page 30)

Renumbering
If you record from the beginning to the middle of a tape
on which another recording has ever been applied, the
same program number may be written twice on that tape.
If you omit designating the next program number when
recording from the middle of the tape, the succeeding
program numbers are not written.
In such cases, proceed as follows to renumber the program
numbers from the beginning of the tape at a high speed.
Renumbering Program Numbers Automatically
1 Make sure that the AUTO indicator is lit, and that the
safety tab of the cassette is at the record*possible
position.
If the AUTO indicator is not lit, press the START ID AUTO
button.
Press the RENUMBER button during playback or in the
stop mode.
The tape will automatically be rewound to the beginning,
and the program numbers are re-arranged from “1” in
numerical order at each start ID position.
While the program numbers are rewritten, the [START IDI
indicator flashes and while the tape is fast-forwarded to
the next start ID, the RENUMBER indicator flashes.
When program numbers are written correctly, the tape is
fast-forwarded to the next start ID.
—SI^TJD —
p SKIP«) -|
p 6NO«> —j
When renumbering is terminated
The tape is automatically rewound to the beginning, and
the deck enters stop mode.
Shifting Start IDs’ and Program Numbers Position
The start ID position may not coincide exactly to the
beginning of the selection, especially when the portion
between selections is not clear. On such a tape, the very
beginning of the selection cannot be located using the AMS
function. If this happens, you can shift the start ID and
program number position, however, you cannot shift the
position of the program number 1.
1
Make sure that the AUTO indicator is off, and that the
safety tab of the cassette is at the record-possible
position.
If the AUTO indicator is lit, press the START ID AUTO
button.
Press the RENUMBER button during playback or in
the stop mode.
The start ID and program number position of the 2nd
selection, and the succeeding selections, will be shifted
forward by about 0.3 of a second.
When program numbers are written incorrectly, the
renumber function operates.
Erasing
Make sure that the safety tab of the cassette is closed.
During playback, press the START ID ERASE button
while the program number to be erased appears in
the display window.
That program number is erased. The start ID at the same
position will also be erased.
The ERASE indicator flashes while the program number
is being searched for, and the [START IDI indicator
flashes while the program number is being erased.
\, ✓
S1M5BHT
✓ \
r-START [0-
-ERAS^
When the program number is erased
Playback continues. The succeeding program numbers
remain unchanged. To re-arrange the program numbers,
renumber them as described on the left column.
30