Sony DTC-57ES - Manual (Page 33)

Playback
Erasing
Make sure that the safety tab of the cassette is closed.
^ Search for the beginning of the end iD with the ^
button. (See page 23.)
When the end ID is detected, the ‘EE* indicator lights.
2 Press the END ID ERASE button.
The END ID ERASE indicator lights while the end ID is
being searched for and then goes off when the end ID is
erased.
c
J
1
Make sure that the TIMER switch is set to the OFF
position, and then turn on the power.
2 Insert the cassette and press the i&OPEN/CLOSE
button to toad the cassette.
3 Press the ► (play) button.
Playback begins.
If an end ID is written on the tape, playback stops
automatically at the end ID position, and the tape will b
rewound to the beginning.
D m
n r
U D s
To control tape transport
To stop playback Press the ■ button.
To stop playback for a moment Press the iiPAUSE
button.
To release pause and restart Press the llPAUSE or ►
playback button.
To remove the cassette Press the ^OPEN/
CLOSE button.
To rewind or fast-fonvard the Stop the tape and press
tape the ◄◄ or ►► button.
Cue/review operation
To advance the
tape (cue) Press the ►►
button during
playback.
To rewind the
tape (review) Press the -*4
button during
playback.
Sound is heard while
the button is
pressed. Release
the button at the
desired point.
Playback resumes.
The speed of the tape increases about 4 seconds after the
cue or review starts.
33