Location and function of controls, Hi power switch, 4] date buttons – Sony DTC-57ES User Manual
Page 6: H] music select buttons, U input selector, D] balance control, M remote sensor, On rec mode selector, Us timer switch
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Location and Function of Controls
Front Panel/Remote Commander
HI
POWER switch
Turns the power on and off.
H] Cassette compartment
Insert a cassette with the window side up and the safety
tab facing you.
[
3
] Display window
[
4
] DATE buttons
RECORDED:
Press to display the recording day of the
tape being played.
PRESENT:
Press to display the current lime.
Each time the RECORDED or PRESENT button is
pressed, day, month and year display, the day of the
week display or hour, minute and second display is
switched sequencially.
H] Music select buttons
Numeric buttons
(0-S): Designate the desired program
number to be played back before starting playback.
Designate the desired number in the record-pause
mode, the program number is written consecutively
from the designated number.
CLEAR:
Use to cancel the program number which has
been mistakenly entered.
MUSIC SCAN:
Use this feature to listen to the beginning
of each selection successively.
(U INPUT selector
Set according to the signal to be recorded.
ANALOG:
For recording from the equipment connected
to the LINE IN jacks.
OPTICAL:
For recording from the equipment connected
to the DIGITAL IN (OPTICAL) jack.
COAXIAL:
For recording from the equipment connected
to the DIGITAL IN (COAXIAL) jack.
[D REC LEVEL (recording level) control
Adjust the recording level for the analog input signals.
When recording digital signals, it is not necessary to
adjust the recording level.
d] BALANCE control
Adjust the recording balance for the analog input signals.
When recording digital signals, it is not necessary to
adjust the recording balance.
m Remote sensor
Receives the signal from the Remote Commander.
on REC MODE selector
Normally set to the STANDARD position.
When this selector is set to the LONG position, you can
record analog input signals or digital signals with 32 kHz
in the long-play mode.
US
TIMER switch
Normally set to the OFF position. When recording or
playing back at the desired time using a commercially
available audio timer, set to the REC position or the PLAY
position respectively.