Sony ICF-SW7600G - Manual (Page 14)

Using the Sleep Timer For Better Reception
I S /95«
raEO
I L- LOCK
STAN06Y M£MOnv
TIMER STANOBY
STANDBY TIME SET
□ 0
ENTER
TIME SET
0^0 0
O 0 ©
O 0 ©
000
f e ^ 0 0 0
MANUAL TUN&SCAN START^
STANDBY TIME SET
T
ime set
M
1 Set POWER/LOCK to POWER.
2 Press SLEEP.
The radio is tuned on. The SLEEP indicator appears in the display.
3 Tune in the desired station and adjust VOLUME.
The radio will be turned off automatically after about 60 minutes.
When you press SLEEP while listening
to the radio
The radio will be turned off
automatically after about 60 minutes.
To turn off the radio before the sleep
time
Press ON/OFF.
To prolong the listening time
Press SLEEP again. The radio will be
turned off about 60 minutes later.
If you press SLEEP after the radio is
turned off
The sleep timer activates and the last
station to be tuned in will be received.
26
Using the Supplied SW Antenna
Usually the telescopic antenna is sufficient for SW reception. How­
ever, in a metal or concrete building, the use of the supplied SW
antenna is recommended.
To Use the Compact Antenna AN-71 Supplied With the ICF-
SW7600G
1 Fully pull out the cord from the case.
2 Attach the coupler to the telescopic antenna.
3 When the window can be opened; Extend the cord and the
case out through the window, after making sure there is no
danger.
When the window cannot be opened: Fully extend the cord
along the frame of the window.
To Use the Active Antenna AN-LP1 Supplied With the ICF-
SW7600GS
Refer fo the instruction manual supplied with the AN-LPl.
Using the External FM Antenna (not supplied)
In a steel-frame building, a moun­
tainous area, at a distance from
the transmitter or in a location
where ignition noise is severe, FM
reception may be unsatisfactory
with the telescopic antenna. In
this case, connect a commercially
available external FM antenna
with a 75-ohm coaxial cable.
External
FM antenna
VA t #
1
75-ohm
coaxial cable
After use
27