Power sources, Batteries, House current – Sony ICF-SW7600G User Manual

Page 6: Car battery, Batteries house current car battery

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Power Sources

Batteries

Before installing the batteries, be sure to check that the MW CH STEP
9/10 kHz selector is set correctly (see page 13).

Notes

•To operate the unit by internal

batteries, disconnect the AC power
adaptor or car battery cord from the

DC IN 6V jack.
When you disconnect them from the
DC IN 6V jack, may flash in the
display even if battery capacity still
remains. To stop the flashing, press
ON/OFF.

•When the batteries are removed for a

long time, the preset stations and the
dock settings will be erased. In this
case, set them again before use.

Battery replacement

•When the bateries run down, the sound

become week and distorted, and <Xi
flashes in the display. Even in this
condition, you can use the unit for a
while.

When the batteries are completely
exhausted, the radio is turned off and
CS3 lights up.

•Replace all the batteries with new one

when <Xi flashes in the display. Even
after you replace the batteries, <Xi
remains flashing. To turn off <X>, press
ON/OFF.

•Replace the batteries within ten

minutes after removing the batteries.
Otherwise, the preset stations and the
clock settings will be erased.

If they are erased, preset the stations
and set the time again.

♦For battery life, see "Specifications".

House Current

Use the AC-E60HG AC power adaptor (supplied with the ICF-
SW760(3GS for Canada and European continent).

Car Battery

For use on a car battery, connect the Sony car battery cord (not sup­
plied) to the EXZ IN 6V jack.
For detailed information, see the Operating Instructions of the car
battery cord.

10

Notes

•The internal batteries are automatically

disconnected when the AC power
adaptor or the car battery cord is
connected to the DC IN 6V jack.

•When connecting and disconnecting

the external power source plug, be sure
to turn off the radio.
Otherwise, the "<XJ" mark will be
displayed and the power will be cut.
If this happens, turn the radio on again.

•After using the AC power adaptor or

the car battery cord, disconnect the DC
IN 6V jack first. When the cord is
connected to the DC IN 6V jack, the
radio does not operate by the internal
batteries.

•Keep the batteries installed for the

built-in computer back-up even if you
use external power sources.
However, replace the batteries once a
year because they «re disrfiarged
gradually.

• Use only the recommended AC power

adaptor or car battery cord
manufactured by Sony. The polarity of
the plugs of other manufacturers may
be different.

Polarity of the plug

11

Advertising
This manual is related to the following products: