Sony ICF-SW7600G - Manual (Page 9)

Manual Tuning
3
4
6
1 Set POWER/LOCK to POWER.
2 Press ON/OFF. The radio is turned on.
3 Press FM/AM to select the band (FM or AM).
Select AM to receive SW, MW or LW.
4 If you select the FM band, skip this step.
While pressing the SCAN STOP/AM BAND, press an outer
MANUAL TUNE/SCAN START/STANDBY TIME SET/TIME SET
button (i<h or <>
1 ) repeatedly to select the desired band or meter
band.
SCAN STOP/
AM BAND
cf
The minimum frequency in that band or meter band is received.
What is a meter band?
SW is divided into 13 bands by the wave
length (meter).
Each band is called a meter band. (See
the table on page 19.)
16
Press an MANUAL TUNE/SCAN START/STANDBY TIME SET/
TIME SET button to search for a desired station. Pressing the
outer (Kh or <>
1 ) or inner (<> or <>) buttons changes the frequency in
the following frequency step.
Band Outer buttons (lO or i>i) Inner buttons (<> or <>)
FM 50 kHz 50 kHz
SW 5 kHz 1 kHz
MW 9/10 kHz 1 kHz
LW 9 kHz 1 kHz
When the station is tuned in, the TUNE indicator lights.
Adjust VOLUME.
To turn off the radio, press ON/OFF.
Frequency band does not change
If you keep pressing MANUAL TUNE/
SCAN START/STANDBY TIME SET/
TIME SET, the frequency will repeat in
the following ranges.
Band Inner buttons
(Oor«i>)
Outer buttons*^
(K> orOi)
FM 76—*108MHz*2
T T
76—* 108MHz*2
1 I
AM 150—*29999 kHz in each broadcast
band or meter band
*1 Scan tuning mode
*2 87.5 <—► 108 MHz for the Italy model
*3 1 30—* 285, 530 *-* 1620,
3850 —* 26100 kHz for the Italy model
17