Sony SLV-789HF - Manual (Page 18)

Presetting channels (continued)
If the picture is not clear
Normally, the Auto Fine Tuning (AFT)
function automatically times in channels
clearly. If, however, the picture of a
channel is not clear, you can also use the
manual tuning function.
t/4/^
OK
Press MENU, tlien press t/4 to highlight
SETTINGS and press OK.
Press f / f to highUght TUNER PRESET,
then press OK. [eJBBBSm
ANTiNNA < CABLE
--- _L._
глгти««
SELECT (m
s ; t M s
3
■© @ ■© Press the number buttons to select the
'© © ■© cliannel you want to fine-tune, then press
Number © © © ENTER.
buttons. © о
ENTER
Selected channel
Press ♦ /4 to highlight FINE TUNING, Ге
then press OK. AMCNNA/CABLE Г CABLE 1
The fine tuning meter appears. MANUAL sri (ЗОЮ
1Г&
Press to adjust to a clearer picture,
then press OK.
Note that the AFT setting switches to OFF.
О Press MENU to exit the menu.
Tips
• To select the channel on step .3 above, you can ako use the CH +/- buttons. In this
case, you don't need to press ENTER.
• If you want to return to the previous menu, highlight RETURN and prcs.s C>K.
Note
• When adjusting FINE TUNING, the menu may become diflicull to read due to
interference from the picture being received.
56
I
Getting Started Getting Started j 57
Setting up the VCR Plus+ GOLD system
How the VOl Plus+ GOLD system works
Whenever you want to record a TV
program, all you need to do is look up
the "PlusCode" number, a number
assigned to each program published in
the TV section of most newspapers,
cable TV listings, and even TV GiUDE
magazine. Then, just enter the PlusCode
number of the program you want and
the VCR is automatically programmed
to record that show. It's that simple.
How to set up your VCR
Setting up your VCR involves
coordinating the TV channel number
(the niunber you turn to on your TV or
VCR to watch a program) with the guide
cliannel (the number that's assigned to
that channel in your program guide).
The VCR can set the guide channels
automatically (see page 59), but you may
have to set the guide channels manually
depending on your area or the way you
hooked up your VCR (see page 62).
To find the guide channel numbers, look
at the "Channel Line-up Chart" in the
program guide for your area that
features VCR PlusCodes. It usually
looks like the example to the right.
Example of "PlusCode"
Plu >Code j
J'
's;30 Ш MOVIE-Musical (2hrs.) BOW il
H SPORT —Go« (1hr. 25mln.) 42Ci60
BZQ—WS 9974
6:30 PBQORAMA—Comedy (2hrs.) 17390 ^
D SCIENCE AND TECHNOLOGY
(Ihr. 15ГТШ1.) 73457
Example of "Channel Line-up Chart"
CABLE
CH CABLE TV
16 f!i*w А/пв4сал Movie Classics 35
17 l=T:t'l Brtvo (progieo) grid only) 54
20 (Ч2Ш Cable News Netwgi^ 42
21 (^C-SPAN /С// /7 28
22 1ЧР1 The Disney СпаппеК^У 53
25 The DI»cov4^i?«anf^ 37
34 iSDfSPN // )) 34
35 (ЗПЭ The Pany^'£^a(inel 47
5 Cn^Home 33
27 яга llle'thSr=L> 46
29 EED «Keyes' 45
30 CSm^A^Teiavislon 46
31 lL'(i!y4fcl()plodeon 38
36 6d^s Channel 59
39 Я9Л Sooa* Channei America 70
45 CfftO Showtime 41
17 ira TBS SuperSlaUan 43
44 iTTfa The Movie Channel 58
49 ai.’i.'i The NasrivWe Netwotv 49
50 Turner Network Television 52
1" URTJ USA Network -
Setting up the VCR Plus+
GOLD system automatically
(Smart Channel Mapping)
The VCR can automatically set the guide
channels in your area from ZIP/
I’OSTAL CODE you entered in EASY
SET UP. The VCR receives the program
information signal and renews the data
everyday after you complete the
following procedure.
1 Set up the VCR using the EASY SET UP function.
2 MENU Press MENU, then pres.s 4/4 to highlight —
О
SETTINGS and press OK.
CABLE BO* COBTFO,
Г''Ла