Sony SLV-789HF - Manual (Page 24)

Additional Operations
Playing/searching
at various speeds
< FEW PLAY
►► FF JOG
:Or
DoJ Di O G^O
Shuttle ring
Playback options Operation
View the picture during
fast-forward or rewind During fast-forward, hold down ►►© FF/^>- FF. iDuring
rewind, hold down REW/-4^ REW.
Play at high speed • During playback, press ►►© FF or REW on the remolo
commander.
• During playback, hold down ►>© FF/P>^ FF or
REW/-« REW.
When you release the button, normal playback resumes.
Play at twice the normal
speed During playback, press x2.
Play in slow morion During playback or pause, press !► SIOW.
Play frame by frame During pause, press FF or -«© REW on the remote
commander. Hold down the button to olav one frame each
second.
Rewind and start play ITnring stop, press t>- PT.AY on the VCR while holding down
■« REW on the VCR-
Using the shuttle ring
With the shuttle ring/ you can operate a variety of playback options. There
are two ways for using the shuttle ring, normal mode and jog mode.
To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or
counterdockwise. Each change in the shuttle ring position changes the
playback mode in the following way.
Slow motion
in reverse
/
Normal speed
in reverse
/
Double speed
in reverse
High speed
in reverse
\
Normal speed
{Initial speed)
\
Double speed
1
High speed
To use the shuttle ring in jog mode
Use Uiis mode for frame-by-frame playback.
Press JCXT j to enter the jog mode. The JOG button lights up. If you clxange to
the jog mode during any playback mode, the playback pauses so you can sw'
a still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring counterclockwise.
The frame sliift speed depends on the speed you turn the shuttle ring.
To resume normal playback, press JOG again. The JOG button goes off.
To resume normal playback
Press O
80 I Additional Operations
Additional Operations j 81
Playingisearching at various speeds (continued)
Tip
• Adjust the picture using the TRACKING +/- buttons if:
- Streaks appear while playing in slow motion.
- The picture shakes while pausing.
To set tracking to the center position, press both buttons (-*-/-) at ih«' same time.
Notes
• The sound is muted during these OfJerations.
• Tapes recorded in the IJ* mode on other VCRs can be played back on. this VCR but
the picture quality cannot be guaranteed.
• The pichrre may have snow:
- when playing at iiigh speed in reverse
- when playing in reverse slow motion
- when playing in reverse
Searching for a
selected point on
the tape
You can easily find a specific point by
moving the pointer on the TV screen.
The VCR fast-forwards or rewinds to the
point you indicate and starts playback
automatically-
Press DISPLAY repeatedly until the bar
indication appears on the TV screen.
A cursor (■) indicating the current position
of tl»e tape appears on the bar indication. If
the cursor does not appear, play the tape a
few moments (by pressing PI-AY,
►►e FT, or
REW) until the cursor
appears.
Press to move the pointer (V) to tin;
point where you want to start playback.
The VCR starts searching and the cursor
(■) moves toward the pointer. When the
VCR locates the marked point, playback
starts.