Tv only, Optional connections – Sony SAT-A1 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TV Only
TV With RF Connector Only
Some TVs label this jack RF
IN,
instead of
VHF/UHF
IN.
Refer to the illustration below.
1
Connect the RG-6 cable from the satellite antenna's LNB to the DSS
receiver's SATELLITE IN jack.
2
Connect the DSS receiver's VHF(SAT)/UHF OUT jack to the TV's
VHF/UHF IN jack.
Note
A VHF/UHF connection does not provide stereo sound. To receive stereo
sound, you must use an A/V connection (described on page 15).
3
Connect one end of the telephone line cord to the DSS receiver's
TEL LINE jack. Connect the other end to your home's modular
telephone outlet.
4
Connect one end of the AC power cord to the DSS receiver's AC IN
jack. Connect the plug end to an AC outlet.
1
RG-6 Cable
from LNB
2
Coaxial
Cable
Optional Connections
□
If you have a cable input, cable box, or a terrestrial TV anterma,
connect it to the DSS receiver's VHF/UHF IN jack.
□
To connect the DSS receiver to your audio system, use audio cables
to connect the DSS receiver to your audio receiver's AUDIO IN
jacks.
14 Chapter 3: Connecting Your System