Using display and jump, To display the program banner, To display the last station you selected – Sony SAT-A1 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using DISPLAY and JUMP
Displaying the
Program Banner
The program banner provides useful information about the program
you're currently watching.
Note
Before you can bring up the Program Banner, you must first clear the program
guide from your TV screen. Pressing EXIT turns off the on-screen displays.
Also, you may need to change to another station if a message appears, which
requests that you press the joystick to purchase the program, etc.
To display the Program Banner;
□ Press the DISPLAY button.
The Natural
9:30-11:30 PM
MON JUNE 22 9:35 PM RATED PG-13 S O <>) □
Jumping Back and Forth
Between Stations
The Program Banner shows the program title, station name and
number, start and end times, current date and time, and rating. It may
also indicate that data services (^) and alternate audio tracks (■!>)) are
available, that new mail has been received (Q), and whether or not the
system is locked (^ ).
To turn off the Program Banner, press the DISPLAY button again.
For information about selecting data services, see page 61; alternate
audio tracks, see page 41; mail messages, see page 47; system lock, see
page 54.
You can use the JUMP button to switch or "jump" back and forth
between two stations.
To display the last station you selected:
□ Press the JUMP button.
Note
You cannot jump to stations you tuned to using the CH+/CH- buttons.
40
Chapter 4: Using the System Features