Using the on-screen displays: highlight and select, Step 1; highlight, Step 2: select – Sony SAT-A1 User Manual
Page 24: Example: highlight and select
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the On-Screen Displays: Highlight and Select______________
All of the features and functions of the DSS receiver can be operated
using a simple, two-step process: Highlight and Select. These two steps
are explained below.
Step 1; Highlight
□ To highlight, move the joystick on the remote to move the on
screen
to the item that you want to select.
Tip
In many of the on-screen displays you
can move the joystick in eight
directions: left, right, up, down, and
diagonally (up left, up right, down
left, and down right).
Step 2: Select
□ After you've highlighted the item that you want, select it by
pressing the joystick.
Example: Highlight and Select
1
In the sample menu that follows, moving the joystick up moves the
highlight from ITEM 5...
SAMPLE MENU
ITEMI
ITEM 2
ITEMS
ITEM 4
ITEMS
ITEMS
ITEM?
ITEMS
ITEM 9
... to ITEM 2.
1 SAMPLE MENU
ITEM 1
ITEM 2
ITEMS
ITEM 4
ITEM 5
ITEMS
ITEM?
ITEMS
ITEM 9
2
Pressing the joystick selects ITEM 2.
You can apply this basic operation of highlighting and selecting to
perform any of the system's functions.
Chapter 4: Using the System Features 27