To lock an unlocked system, Set locks and limits, Set passcode – Sony SAT-A1 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Locking Your System
Selecting CANCEL returns you to the
previous screen, ivithout saving your
selections.
To lock an unlocked system:
1
Select LOCK from the Set Locks and Limits screen.
SET LOCKS AND LIMITS
SPENDING LIMIT
$
10.00
RATINGS LIMIT PG
RETURN
STATION LOCK 4 Stations Locked
HELP
PPV LOCK
Pay Per View Unlocked
The Set Passcode screen appears. Enter a four-digit passcode
number. Use the 0-9 buttons or move the joystick up and down to
enter the numerical value. (If you use the joystick to enter the
value, move the joystick left or right to move to the previous or
next position.)
Each number you enter appears as an asterisk (*), which keeps
your passcode secret.
SET PASSCODE
OK
!□□□
CANCEL
HELP
Note
DON'T FORGET YOUR PASSCODE. You'll need this number to unlock
your system or to make any changes to the locks and limits you've set. If you
do forget your passcode, call your program provider for assistance.
3
When prompted, enter your passcode again. (This confirms your
selection of a passcode number.)
4
Select OK to return to the Set Locks and Limits screen.
Your system is now locked, as indicated by the closed padlock (fl ) in
the Set Locks and Limits screen. All locks and limits you've set are now
in effect. The padlock also appears in the Program Banner to remind
you of the locked status.
Chapter
5:
Using the Custom Setup Menu 57