Accessories for ttl multiple flash, Ttl remote cord sc-17, Ttl remote cord sc-24 – Nikon Autofocus Speedlight SB-24 User Manual
Page 125: Ttl multi-flash adapter as-10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ACCESSORIES FOR TTL MULTIPLE FLASH
TTL Remote Cord SC-17
For Programmed TTL auto flash operation or TTL auto flash
operation when using the SB-24 off the Nikon F4-Series (with
DP-20 or DA-20), F-801/N8008, F-501/N2020, F-401s/N4004s,
F-301/N2000, FA, FE2 or FG camera, use coiled cord SC-17.
The SC-17 provides automatic sync speed setting and the same
ready-light view-finder indication as if the flash unit were directly
mounted on the camera. SC-17 comes with two TTL multiple flash
terminals and one tripod socket. The SC-17 is approx. 1.5m (4.9 ft).
TTL Remote Cord SC-24
For TTL auto flash operation when using the SB-24 off the
Nikon F4 camera fitted with either the 6X High-Magnification
Finder DW-21 or Waist-Level Finder DW-20, use SC-24 instead
of SC-17.
The SC-24 also comes with two TTL multiple flash terminals and
one tripod socket. The SC-24 is approx. 1.5m(4.9ft).
TTL Multi-Flash Adapter AS-10
When using more than three flash units for TTL multiple flash
operation, use the Multi-Flash Adapter AS-10, an adapter with
three multiple flash terminals and one tripod socket. (Requires
SC-18 or SC-19 for each flash use.)
90