Nikon Autofocus Speedlight SB-24 User Manual
Page 131
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
• When not using the SB-24, remove
batteries to avoid damage due to
battery ieakage. if ieakage occurs, take
the SB-24 to your nearest authorized
Nikon deaier.
When not using the SB-24, perform the
foliowing once a month:
1. Install batteries, then turn on the
SB-24.
2. Wait until the ready-light comes on.
3. Turn off the SB-24, then remove the
batteries.
94
Advertising