Nikon Autofocus Speedlight SB-24 - Manual (Page 78)

TTL AUTO HD FLASH WITH OTHER CAMERAS-
(with Nikon F-501/N2020, F-301/N2000, FA, FE2 or FG)
PROGRAMMED TTL AUTO FLASH (with Nikon
F-501/N2020 or F-301/N2000 in Programmed or
Shutter Priority Auto Exposure Mode)
Programmed TTL auto flash simplifies camera/flash operations,
With a Nikon F-501/N2020, F-301/N2000, FA, FE2 or FG
camera, the SB-24 set at TTL provides standard TTL flash light
output control. With the F-501/N2020, F-301/N2000 in pro­
grammed or shutter-priority auto exposure mode. Programmed
TTL auto flash will be selected. In other cases, the SB-24
performs TTL auto flash.
allowing you to concentrate on picture composition without
worrying about exposure settings, including aperture.
For correct exposure in TTL auto flash mode, use film
within the range specified below:
F-501/N2020 and F-301/N2000 ISO 25 to 1000
FA, FE2 and FG
ISO 25 to 400
For programmed TTL auto flash operation, use Al-S
type* lenses only.
* Al-S type lenses include AF Nikkor, Nikkor lens with a
built-in CPU and Series E lenses. Each lens shows the
minimum aperture in orange at the aperture indexing
post on the aperture ring. Lenses modified for Al
operation cannot be used for this mode.
* For autofocus operation with the F-501/N2020, set the
camera’s focus mode to Single Sen/o Autofocus. (For details
about autofocus flash photography, see pages 64 to 65).
* Set the camera’s film advance mode to single-frame shooting.
57