After shooting – Nikon Autofocus Speedlight SB-24 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
After shooting;
With the SB-24 in TTL auto or non-TTL auto flash mode, if both
viewfinder ready-light and SB-24 ready-light blink for a few
seconds after shooting, the flash has operated at maximum
power. Check the SB-24's LCD to determine whether you were
standing at a distance beyond the indicated maximum range.
Depending on conditions, choose a wider aperture for maximum
flash range (switch exposure mode to A or M if it is set at P or
S), or move closer to the subject.
Advertising