Non-ttl auto h, Manual m, Repeating flash sis – Nikon Autofocus Speedlight SB-24 User Manual
Page 16: Manual ca, Repeating flash
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NON-TTL AUTO H
In this mode, light is read through the light sensor on the front
of the SB-24, instead of being measured through the lens.
Exposure control requires that you manually adjust the lens
aperture. For non-TTL auto flash mode, see pages 66 to 68.
MANUAL
m
Lets you select flash power from full power of 1/16 power and
set aperture according to flash-to-subject distance. Indicated on
the LCD panel.
For manual flash, see pages 70 to 76.
REPEATING FLASH SIS
This mode lets you flash a subject two or more times
consecutively in the same frame. It enables you to select the
number of flashes, flash speed (FIz) and power—either 1/8 or
1/16.
For detailed instructions on repeating flash, see pages 77 to 80.