Special standby function, On position – Nikon Autofocus Speedlight SB-24 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Special Standby Function
In normal Standby function, when the camera's meter turns off,
the SB-24 also turns off. To reactivate the SB-24, turn the
camera’s meter on. With the following procedure, however, even
after the camera's meter turns off, the SB-24 automatically
recharges In approx, one-hour Intervals, so it will always be
ready for long shooting sessions.
1. Set power switch to OFF to turn off the SB-24.
2. While pressing illuminator button, set power switch to STBY.
3. Confirm LCD panel display blinks approx. 8 seconds.
• The SB-24 can be kept in standby for approx. 20 days
with AA-type aikaline-manganese batteries or approx.
10 days with AA-type NiCd batteries.
• To cancel this function, set the SB-24's power switch to
OFF.
ON Position
—With Nikon FA, FE2 or FG:
To turn on the SB-24 when using a mechanical shutter setting
(M250 with FA or FE2, M90 with FG, or B), you cannot use
STBY position; set the power switch to ON.
When not using the SB-24, always set power switch to
OFF to conserve battery power.