Setting before shooting, Installing batteries, Setting before shooting -24 – Nikon Autofocus Speedlight SB-24 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SETTING BEFORE SHOOTING
INSTALLING BATTERIES
4 Close the battery chamber lid, then
' slide cover back to close.
2 Slide the meter/feet lever to select
' the desired indication (meters or feet)
on the LCD panel. (Set at meters when
shipped from factory.)
3 Load four 1.5V AA-type penlight
" alkaline-manganese or 1.2 V NiCd
batteries into the battery chamber. Be
sure to follow the indicators
inside the chamber to ensure batteries
are properly loaded.
For an external power source, use
optional Nikon DC Unit SD-7. For
battery information, see page 95.
17
Advertising