Canon AUTO ZOOM 1014 - Manual (Page 43)

3 Film Rewind Indicator
It is used to rewind film for superimposition and lap dissoive.
• The fading setting indicator must first turn blue by sliding :ne fading
setting button to the right, or it will be impossible to move the film
rewind switch button to the left.
• When the film rewind switch button is moved to left and the ¡ndicator
turns blue, the rewinding mechanism is set and ready inside the camera.
Once the film rewind indicator turns blue, it is impossible to change it to
orange by hand, because the rewinding mechanism is programmed inside
the camera.
4 Rewind Mechanism Cancellation Button
Press this button after locking the variable shutter control ring at
"O" when you want to stop superimposiiion or lap dissolve or when
you have set the film rewind switch button to the left (blue) bv mistaKe
The film rewind indicator will remain blue even when tne rewind
mechanism cancellation button is pressed. But the rewinding mechanism
inside the camera will be cancelled for ordinary film driving. After pulling
the trigger and shooting for a while, the indicator will automatically
turn orange.