Canon AUTO ZOOM 1014 - Manual (Page 78)

Manual Zooming: With zooming ring, zooming speed switch at M, and
120° rotation angle.
Running Ability: About 10 caaridges in normal temperature. Single-frame
shooting with new batteries, 1.5 cartridges or more.
Footage Counter: Counts exposed footage. Automatically resets by
removing the cartridge.
Frame Counter: 72 frames in one rotation (1 ft.) 2 frames per scale. With
adjustable indication mark.
Battery Check: Check button and check window.
Handgrip: Folding type, containing battery chamber.
Sockets: For remote control, and for electronic flash synchronized to
single-frame shooting.
Remote Control: Possible with Remote Control Switch 60 or 3.
Switch Dial: Safety switch, with running lock.
Safety
Devices: Over/under-exposure warning marks, shutter lock, shutter
angle indicator and film transport indicator to prevent mistakes
when shooting.
Macro-Shooting System; Close-up shooting mechanism works by switching
the zooming ring. When the distance scale is set at infinity, it is
possible to get at 18.9cm (7-7/16‘’l from the film plane indicator
and 10mm (3/8"l from the tip of the lens to the subject.
Time Control and Interval Shooting: By using the Interval Timer E,
and the Time Lapse Programmer, intermittent shooting with inter­
vals is possible.
Self-Timer: 10 seconds shooting after 10 seconds by attaching Self-Timer
E.
Accessories: Rubber Hood S-60, Soft Cate, 58mm Filter. 58mm Close-Up
Lens 450 C-8-2. 240 C-8, Remote Control Switch 60. Remote
Control Switch 3, Lens Cap, CCA Filter Cancellation Adapter, CCA
Filter Cancellation Adapter Socket Cover, Cover for Remote
Control Socket, Interval Timer E, Self-Timer E, ‘Time Lapse
Programmer, Extension Cord E1000. ('This accessory is available
upon special order.)
Size: 93.5 x 277 x 121mm (3-11/16" x 10-15/16" x 4-3/4").
Weight: 1,990 gr. (4 lbs. 6 ozs.) with batteries.
Subject to change without notice.