Canon E 230 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MODE SELECT
a
5
^
QO
1CH OCH
)
OPERATE
Q
—
••• mat
1
\L
Selecting Video Channel (Australian model)
Video channel means the channel in your area which is not used
by a broadcasting station, and can be used for playback of video
cassettes (channel 0 or 1). If your TV does not have audio/video
inputs, your TV and the video channel selector of the RU-100 RF
Unit must be set to the video channel In order to view playback.
1. Turn TV on.
2. Turn camera on.
3. Press MODE SELECT button to select PLAY
mode.
4. Press ^ (PLAY) button to start playback.
5. Set TV and video channel selector to video
channel (video channel selector is factory-set to
1CH) using a flat-edge screwdriver.
• For example, if video channel in your area is channel 0, set
video channel selector of RU-100 to OCH, then tune TV to
channel 0.
66