1 powering on and powering off the apd-100, Powering on and powering off the apd-100 – Salter Brecknell APD-100 User Manual
Page 16
16
APD-100 Automatic Powder Dispenser User Instructions
Installation
3.1 Powering On and Powering Off the APD-100
1.
Press the ON/OFF key to power on the APD-100…
The display alternates between WARMUP and a count down clock. The
APD-100 is equipped with an automatic 10-minute warm-up feature to
allow the electronic components to warm up and stabilize for accurate
weighing.
In the warm-up mode, the weighing, powder dispenser and calibration
features will be blocked, however, you can still enter settings into the
memory as well as recall and edit existing memory.
2.
To turn off the APD-100, press and hold the ON/OFF key until the display
shows OFF…
The unit will power down shortly after OFF appears.
We recommend you allow the scale to fully warm-up before use. If this is not possible,
the warm-up mode can be cancelled by pressing the CANCEL key.
Always turn off the APD-100 by pressing ON/OFF key first, and then unplug the
power adapter!