Salter Brecknell APD-100 - Manual (Page 31)

APD-100 Automatic Powder Dispenser User Instructions 31
6.1 Cleaning
4. Grasp the end of the power feed tube and unscrew and remove it from the unit.
See Figure
6.4 . Be careful to catch any remaining powder that may still be in
the tube.
Figure 6.4 Unscrewing and removing feed tube
5. Close the powder chute and then push the powder compartment in to release
it from the unit. The box will pop out slightly. Pull it free of the unit for cleaning.
See Figure
6.5 .
Figure 6.5 Removing the powder compartment
Before reassembly, BE SURE that all powder is removed from the feed tube and
powder compartment!