Catler ES 8012 - Manual (Page 29)

29 29
PROGRAMMING YOUR ESPRESSO MACHINE ES 8012
Pre-programmed dose - one cup
Press the one cup button once. A preset dose
of approximately 30mls will be delivered.
A pumping noise will be heard in this operation.
The machine will automatically stop once the
preset pour has been delivered.
NOTE:
The amount of espresso extracted in the
cup will vary depending on your grind
and grind amounts.
NOTE:
When using a 1 cup filter, for optimal
flavour, you should only extract approx-
imately 30ml. When using a 2 cup filter,
for optimal flavour, you should only ex-
tract approximately 60ml.
Pre-programmed dose– double cup
Press the two cup button once. A preset
dose of approx 60mls will be delivered. A pump-
ing noise will be heard in this operation.
The machine will automatically stop once the
preset pour has been delivered.
NOTE:
Pressing the one cup
or two cup
buttons during a programmed espresso
will immediately stop the pour.
Programming single espresso
1. Prepare to make a single cup of espresso
by following steps 2 to 6 in ‘A MINUTE TO
LEARN’ on pages 20-23.
2. Place your cup underneath the group head.
3. To begin programming, press the ‘PRO-
GRAM’ button once. The machine will beep
once and the program button will begin to
flash. This indicates the machine is in pro-
gramming mode.
4. Press the one cup button once. The ma-
chine will commence normal pour function,
and the one cup button surround will begin
to flash.
5. When the desired amount of espresso has
poured into the cup, press the one cup
button to stop the pour. The machine will
beep twice, indicating it has saved your
measured pour quantity and exited pro-
gramming mode.