Removing the manual brake, Removing the manual brake -7, Figure 1-8: air brake—remove the air cylinder – Dynojet 150: Eddy Current Brake User Manual
Page 13: Figure 1-9: remove the manual brake
Advertising
E D D Y C U R R E N T B R A K E I N S T A L L A T I O N
Air Brake and Manual Brake Removal
Version 8
Eddy Current Brake Installation Guide
1-7
6
Remove the bolt securing the spring bolt mounting plate.
7
Remove the mounting plate and the air cylinder from the dyno frame.
Figure 1-8: Air Brake—Remove the Air Cylinder
R
EMOVING
THE
M
ANUAL
B
RAKE
1
Disconnect the brake line from the master cylinder to the caliper.
2
Remove the four bolts, lock washers, and flat washers that secure the master
cylinder and foot pedal.
The bolts run from the inside, through the master cylinder, and into the foot
pedal mounting plate.
Figure 1-9: Remove the Manual Brake
bolt
air cylinder
mounting plate
foot pedal
master cylinder
Advertising
This manual is related to the following products: