CK Electric Part KX-FMC230 - Manual (Page 19)

19
Initial preparation
Setup (Main Unit)
Installing the diverter !
Insert the diverter into the slots on the main unit until it
clicks into place.
Installing the paper tray !
1 Open the paper tray.
2 Insert the two tabs on the paper tray into the slots
on the back of the main unit.
¡ Do not place the main unit in areas where the
paper tray may be obstructed by walls, etc.
Paper tray
Paper tray
Slots
Tabs
Diverter
Slots
Bottom
Pull out the paper stacker from the bottom of the main
unit completely.
Paper stacker
Pulling out the paper stacker !