CK Electric Part KX-FMC230 - Manual (Page 20)

20
Setup (Main Unit)
3 Move the recording paper set lever back.
Recording paper
set lever
Note:
¡ Do not use different types or thicknesses of paper in the paper tray at the same time. This may cause a
paper jam.
¡ Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated, damaged or
wrinkled paper with a cotton and/or fiber content that is over 20 %.
¡ Avoid used paper for double-sided printing.
¡ Do not use paper printed from this unit for double-sided printing with other copiers or printers, or a paper jam
may occur.
Upper limit
Tab
Correct Incorrect
Paper tray
Stack of
paper
1 Pull the recording paper set lever forward.
Recording paper
set lever
Installing the paper !
Letter or legal size recording paper can be loaded. The paper tray can hold up to 150 sheets of 75 g /m 2
(20 lb.) paper. You may use 60 g /m 2 to 90 g /m 2 (16 lb. to 24 lb.) paper.
2 Fan the stack of paper to avoid a paper jam and
insert the paper into the paper tray.
¡ The height of the stack of the paper should not
exceed the upper limit on the paper tray, or a
paper jam may occur.
¡ The paper should not be over the tab.
¡ If the paper is not inserted correctly, readjust the
paper or a paper jam may occur.