CK Electric Part KX-FMC230 - Manual (Page 30)

30
Making Calls
1 » Handset is off the main unit:
Press (TALK) .
¡ The TALK/BATT LOW indicator lights.
» Handset is on the main unit:
Lift the handset and press (TALK) .
¡ The TALK/BATT LOW indicator lights.
2 Dial the telephone number.
¡ If you misdial, hang up and dial again.
3 To hang up, press (TALK) or place the handset
on the main unit.
¡ The indicator light goes out.
Note:
¡ If an alarm tone sounds in step 1, move towards the
main unit or place the handset on the main unit.
Then try again.
(TALK)
(REDIAL/PAUSE)
(CH)
TALK/BATT LOW
indicator
Dial keypad
Making calls with the handset !
To redial the last number
Press (TALK) , then press (REDIAL/PAUSE) .
If noise interferes with the
conversation
Press (CH) to select a clear channel or move
closer to the main unit.
Lighted keypad
The dialing buttons will light while dialing and flash
when a call is received.
The lights will go out about 10 seconds after
dialing or answering a call.