CK Electric Part KX-FMC230 - Manual (Page 37)

37
Telephone
Dialing
1 2 3
4 5 6
7 8 9
0
Storing telephone numbers in the main unit !
The main unit’s memory allows you to use both one-touch dialing and speed dialing for rapid access to your
most frequently dialed numbers.
One-touch dialing: 18 stations (Each of the 9 direct station keys is divided into an upper station and a lower
station).
Speed dialing: 100 additional dialing stations. These stations are assigned to 2-digit numbers (00–99).
1 Press (MENU) three times.
Display:
2 » One-touch dialing:
For upper stations (1–9)
Press one of the direct call station keys.
For lower stations (10–18)
Press
(LOWER) , then press one of the direct
call station keys.
OR
» Speed dialing:
Press K , then press the desired 2-digit
number (00–99).
3 Enter the telephone number up to 30 digits in
length.
¡ To enter a hyphen in a telephone number, press
(HYPHEN) (direct call station 8).
4 Press (START/COPY/SET) .
5 Enter the station name, up to 10 characters, by
following the instructions on page 24.
6 Press (START/COPY/SET) .
¡ To program other stations, repeat steps 2 to 6.
7 Press (STOP) .
Helpful hint:
¡ To confirm stored telephone numbers and station
names, print a telephone number list (see page 119).
STORE TEL NO.
NAME=
STORE TEL NO.
To keep the phone number
secret
Press (SECRET) (direct call station 3) after
entering the telephone number.
¡ The telephone number will not appear on the
display and the telephone number list.
¡ (SECRET) is not counted as a digit.
To erase a stored number and
station name
Press (STOP) in step 3 to erase the telephone
number. Press (STOP) in step 5 to erase the
name.
Then press
(START/COPY/SET) .
(MENU)
(LOWER)
(STOP)
(START/COPY/SET)
Speed dial
stations
Direct call
stations
(SECRET)
(HYPHEN)