CK Electric Part KX-FMC230 - Manual (Page 44)

44
Sending Faxes
Document
feeder tray
(RESOLUTION)
Sending manually !
1 Open the document feeder tray.
2 Insert the document FACE DOWN (up to
15 sheets) until a beep tone is heard.
Display:
3 Adjust the width of the document guides.
4 Press (RESOLUTION) repeatedly to the desired
setting, if needed (see below).
5 Press (SP-PHONE) .
or
Press
(TALK) on the handset.
6 Dial the telephone number.
¡ If you misdial, hang up and dial again.
7 When a fax tone is heard, press
(START/COPY/SET) on the main unit.
¡ The unit is detecting whether the other party’s
machine is a fax. Then the unit will start
transmission.
COMMUNICATING...
STANDARD
FACE DOWN
Dial keypad
(START/COPY/SET)
(STOP)
(SP-PHONE)
Document guides
Selecting the resolution
STANDARD: For printed or typewritten originals
with normal-sized characters.
FINE: For originals with small printing.
SUPER FINE: For originals with minute printing.
HALF TONE:
For originals containing
photographs, shaded drawings,
etc.
¡ Using the fine, super fine or half tone setting will
increase the transmission time.
¡ If the resolution setting is changed during
feeding, it will be effective from the next sheet.
¡ The super fine resolution only works with other
compatible machines.
To feed 16 or more sheets at a
time
Insert the first 15 sheets of the document. Add the
extra sheets (up to 15) before the last sheet is fed
into the unit.
To redial the last number
Press (REDIAL/PAUSE) .
¡ If the line is busy, the unit will automatically redial
the number up to 5 times.
To stop transmission
Press (STOP) .
¡ To eject the document, press (STOP) again.
STANDARD
FINE
SUPER FINE
HALF TONE
(TALK)
Dial keypad
Note:
¡ If the other party answers your call, ask them
to start receiving a fax, then press your
(START/COPY/SET) .
(REDIAL/PAUSE)