Dynojet 250ix: Pre-Installation Guide - Manual (Page 10)

Pre-Installation Guide for Model 200i/250i, 200iP/250iP, 250iX, and 250iPX Motorcycle Dynamometers
D Y N O P R E - I N S T A L L A T I O N I N F O R M A T I O N
Introduction
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION
Thank you for your interest Dynojet’s Motorcycle Dynamometers. Before receiving
your dyno, please take a moment to read this guide for dyno specifications and
requirements, WinPEP 7 requirements, and dyno room set-up.
C ONVENTIONS U SED I N T HIS M ANUAL
The conventions used in this manual are designed to protect both the user and the
equipment.
T ECHNICAL S UPPORT
For assistance, please contact Dynojet Technical Support at 1-800-992-3525, e-mail
Dynojet at [email protected], or write to Dynojet at 2191 Mendenhall Drive,
North Las Vegas, NV 89081.
Visit us on the World Wide Web at www.dynojet.com where Dynojet provides state of
the art technical support, on-line shopping, 3D visualizations, and press releases
about our latest product lines.
example of convention description
The Caution icon indicates a potential hazard to the
dynamometer equipment. Follow all procedures
exactly as they are described and use care when
performing all procedures.
The Warning icon indicates potential harm to the
person performing a procedure and/or the
dynamometer equipment.