Dynojet 250ix: Pre-Installation Guide - Manual (Page 14)

Pre-Installation Guide for Model 200i/250i, 200iP/250iP, 250iX, and 250iPX Motorcycle Dynamometers
D Y N O P R E - I N S T A L L A T I O N I N F O R M A T I O N
Specifications and Requirements
6
E NVIRONMENTAL R EQUIREMENTS
F IRE S UPPRESSION
Always have adequate fire suppression or fire extinguishers in your dyno room.
F ORKLIFT R EQUIREMENTS
You will need to provide equipment capable of lifting a minimum of 1,077 kg
(2,375 lb.) to lift the dyno off the crate and into position in your dyno room. You will
need a pair of straps capable of supporting 1,077 kg (2,375 lb.) to attach to the dyno.
Dynojet recommends using single loop style straps.
P HONE AND I NTERNET A CCESS
Dynojet recommends you have a phone close to the dyno to call for assistance in an
emergency. You may also wish to contact Dynojet to troubleshoot your dyno.
Internet access on your computer is desirable for contacting Dynojet and
downloading new information and updates.
T IE -D OWN S TRAPS
Dynojet recommends using tie-down straps for securing the motorcycle on the dyno.
description specifications
Temperature
operating min./max 10°C/50°C (50°F/122°F)
storage min./max 0°C/60°C (32°F/140°F)
Humidity 0 to 95% non-condensing