Specifications and requirements, Battery requirements, Compressed air – Dynojet 250ix: Pre-Installation Guide User Manual

Page 12: Computer specifications

Advertising
background image

Pre-Installation Guide for Model 200i/250i, 200iP/250iP, 250iX, and 250iPX Motorcycle Dynamometers

D Y N O P R E - I N S T A L L A T I O N I N F O R M A T I O N
Specifications and Requirements

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SPECIFICATIONS AND REQUIREMENTS

The following specifications and requirements apply to all motorcycle dynos in this
manual. Take a moment to review the requirements and make sure you can provide
what your dyno will need.

B

ATTERY

R

EQUIREMENTS

A motorcycle starting system is included with your dyno. You will need to purchase an
automotive battery locally to use this feature. The battery is also necessary to run the
power carriage and wheel clamp options. The dyno is designed to carry a group 24
deep cycle series battery with a minimum of 600 cold cranking amps.
For more information on installing the battery, refer to the dynamometer installation
guide included with your dyno.

C

OMPRESSED

A

IR

The following requirements are needed for the optional air brake and/or the AFR-4
pump:
• regulator set to 65 psi max (450 kilopascal) for air brake
• 5 CFM minimum for AFR-4 pump
• air dryer
• shut off valve
• gauge on the regulator
• 1/4-inch NPT pipe thread connector (to attach air to the dyno), if air hose does not

have a 3/8-inch inside diameter

C

OMPUTER

S

PECIFICATIONS

You will need to provide a computer system to run the WinPEP software.

minimum system requirements

recommended systems requirements

• Microsoft® Windows 2000/XP

• Microsoft® Windows 2000/XP

• 800 MHz Processor

• 2.4 GHz Processor or greater

• 256 MB of available RAM

• 512 MB of available RAM or greater

• one 9-pin COM port, two 9-pin COM ports for

Tuning Link

• one 9-pin COM port, two 9-pin COM ports for

Tuning Link

• 1024 x 768, 256 color monitor (XGA)

• 1280 x 1024 256 color monitor (SXGA) or better

• 1.2 gigabyte hard drive

• 40 gigabyte hard drive

• 30 MB of available hard-disk space

• 100 MB of available hard-disk space

• CD ROM

• CD ROM

• printer, if hard copies are needed

• printer, if hard copies are needed

Advertising