Dynojet 250iPX: Installation Guide - Manual (Page 26)

Model 200iPX/250iPX Upgrade Installation Guide
C H A P T E R 1
Drum Installation
1-18
4 Remove the crate braces that support the top portion of the crate.
5 Remove the four lag bolts and washers securing the drum to the crate base using
a 9/16-inch socket, open or box end wrench.
woodruff key, 3/8 x 1-3/8"
P/N 37620622
nut, crush, 1/4-20 (4)
P/N DM150-020-005
The following parts are included in the Ground Hook Kit P/N 79190001:
ground hook/D-ring (4)
P/N 10111
anchor, redhead, 3/8" (8)
P/N 37513200
D-ring bracket, surface
mount (4)
P/N 10112
washer, 5/16", flat (8)
P/N DM150-002-007
washer, 3/8", splitlock, steel
(8)
P/N 36932100
bolt, 3/8-16 x 1", hex (8)
P/N DM150-019-012
part description part description