Dynojet 250iPX: Installation Guide - Manual (Page 9)

Model 200iPX/250iPX Upgrade Installation Guide
1-1
C
H A P T E R
1
M
ODEL
200
I
PX/250
I
PX U
PGRADE
Thank you for purchasing the 200iPX/250iPX upgrade for Dynojet’s Model
200iP/250iP Motorcycle Dynamometer. This upgrade will allow you to run a kart, ATV,
or trike on your motorcycle dynamometer. Dynojet’s software and dynamometers will
give you the power to get the maximum performance out of vehicles you evaluate.
Whether you are new to the benefits of a chassis dynamometer or an experienced
performance leader, the repeatability and diagnostic tools of WinPEP 7 software and a
Dynojet dynamometer will give you the professional results you are looking for.
This document provides instructions for installing the 200iPX/250iPX upgrade to
Dynojet’s Model 200iP/250iP Motorcycle Dynamometer (dyno). This document will
walk you through the installation and basic dyno operation. To ensure safety and
accuracy in the procedures, perform the procedures as they are described.
Document Part Number: 98200014
Version 1
Last Updated: 03-18-08
This section is divided into the following categories:
• Introduction, page 1-2
• Model 200iPX/250iPX Upgrade Specifications, page 1-3
• Verify the Pit Dimensions, page 1-6
• Dyno Preparation, page 1-7
• Drum Installation, page 1-17
• Pit Cover Installation, page 1-23
• Ground Hook Installation, page 1-28