Dynojet 250iPX: Installation Guide User Manual
Page 32
Advertising
Model 200iPX/250iPX Upgrade Installation Guide
C H A P T E R 1
Pit Cover Installation
1-24
2
Loosely install the middle pit cover to the dyno drum guard mounting bracket
using four 1/4-20 x 1/2-inch screws removed earlier.
3
Place the middle pit cover on the dyno drum module uprights and align the
middle pit cover with the existing dyno pit cover.
4
Loosely install the middle pit cover to the dyno drum module uprights using the
four 3/8-16 x 1/2-inch screws removed earlier.
5
Loosely install the middle pit cover to the iPX drum module uprights using two
3/8-16 x 1/2-inch button-head flange screws.
Figure 1-19: Install the Middle Pit Cover to the Dyno and iPX Drum Module
middle pit cover
Advertising
This manual is related to the following products: