ETS-Lindgren HI-6153 Electric Field Probe - Manual (Page 10)

x |
General Safety Considerations
LASER HAZARD. Laser power up to 150 mW at
830 nm may be accessible at the fiber connector of the
laser. However, the laser beam itself is not hazardous
as the interlock ensures that the exposure time will be
less than 30 ms.
See the ETS-Lindgren Product Information Bulletin for safety,
regulatory, and other product marking information.
ETS-Lindgren Product Information Bulletin
See the ETS-Lindgren Product Information Bulletin included with your shipment
for the following:
 Warranty information
 Safety, regulatory, and other product marking information
 Steps to receive your shipment
 Steps to return a component for service
 ETS-Lindgren calibration service
 ETS-Lindgren contact information