ETS-Lindgren HI-6153 Electric Field Probe - Manual (Page 103)

Operating Protocols | 103
Probe
Command
Description Probe Response
BP Read probe converter
voltage in hexadecimal
format
:B64N
 N=safe operating level
 F=fail level
Voltage reported as 0–64;
64 corresponds to 100%
The BP command is provided for backward compatibility and should
not be used to monitor the converter voltage, which always responds
with :B64N<CR>.
Probe
Command
Description Probe Response
D3 Read probe data :Dx.xxxyy.yyzzz.zB<CR>
 xxxx, yyyy, zzzz=
4-digit axis values with
floating decimal point
 B=battery flag, N or F
D5 Read probe data :Dx.xxxyy.yyzzz.zcccc.B<CR>
 xxxx, yyyy, zzzz=
4-digit axis values with
floating decimal point
 cccc=composite field value
with floating decimal point
 B=battery flag, N or F