ETS-Lindgren HI-6153 Electric Field Probe User Manual
Page 104
104
|
Operating Protocols
Probe
Command
Description
Probe Response
I
Identification command
:I61XX<sr><sn><cd>B<CR>
XX=specific probe model
sr=10-character software
revision
sn=8-character serial
number
cd=8-character calibration
date
B=battery flag, N or F
The Identification command,
I, may also be used as the first command
sent. The command will turn on the laser. Once communication
between the probe and the Laser Data Interface (LDI) is established,
the return string will be sent. Subsequent
I commands immediately
send the return string.
Probe
Command
Description
Probe Response
TC
Read temperature in
Centigrade
:Txxxx.<CR>
TF
Read temperature in
Fahrenheit
:Txxxx.<CR>
<Null><CR>
Send the ASCII null
character
:N<CR>
<Null><CR> is a special command that can be used as the initial
command to the probe
after it is turned on.